IC-F110S VHF TRANSCEIVER
IC-F210S UHF TRANSCEIVER
VHF AND UHF TRANSCEIVERS


Icom proudly announces the debut of the new commercial mobile transceiver, the IC-F110S and IC-F210S series. This series follows on from the highly successful IC-F310S series, and is the ideal complementary unit of the IC-F11/S handheld series, too. The IC-F110S and F210S series provides serious professional features such as ultra tough construction, multiple signaling functions as standard and wide frequency coverage. Higher output versions (VHF 50W / UHF 45W) add a further dimension to complete this range of cost effective LMR mobiles that will suit a wide range of users from commercial to Public Safety markets.



SELLING POINTS
  • Simple Operation
  • Large buttons and volume knob
  • 8 memory channels with LED display
  • Front mounted speaker
  • Multiple signaling functions standard
  • High power versions available
  • Very competitive price


FEATURES


Simple operation
Simple is best, simple means efficiency. 4 large programmable buttons with LED indicators maximises use of all functions. An independent volume knob adds to the allround ergonomic design based on simplicity.

Front mounted speaker
The IC-F110S series front-mounted speaker is facing the operator, so that the audio is crisp and clear in all environments, quiet and noisy alike.

Multiple signaling functions
2-tone, 5-tone, CTCSS, DTCS encoder and decoder are built-in to satisfy most market requirements for signaling. A DTMF encoder allows up to 24-digit DTMF autodialing. And when an optional UT-108 is installed, DTMF decoder and ANI functions are also available.

High power versions
Higher power versions, IC-F111S/F121S (VHF 50W) and IC-F211S/F221S (UHF 45W), are available for reliable long distance communications. With these versions, the IC-F110S/F210S series is complete as the ideal cost effective commercial mobile answer to your communication needs.

Hook Scan on/off button is programmable
Hook scan is the function when the hand microphone is put on the hanger, the transceiver automatically starts scanning. The hook scan on/off button allows you to temporary start and stop this function on the spot. In addition, LED indicates the hook scan on/off setting, according to the cloning.

Compact dimensions and durable construction
Icom's superior technological expertise results in the ICF110S/ F210S series being far improved in performance and value, despite its reduction in physical size. The diecast chassis becomes lighter, but does not compromise on the durability and reliability Icom is famous for. That is why this series is MIL-spec grade strong enough to withstand almost all operating environments, as well as installation into vehicles that ride over even the roughest terrain.

Optional voice scrambler
With the optional voice scrambler units, UT-109 or UT-110, installed, added communication security is obtained.

Other features


ADDITIONAL FEATURES

Advanced Multi 2-Tone / 5-Tone systems

Other features


SPECIFICATIONS

GENERAL
Frequency coverage IC-F110S 136-174MHz  
IC-F210S 400-430MHz  440-490MHz
Number of channels 8 (4 x 2 banks)
Channel Spacing 12.5/25kHz 12.5/20kHz
PLL channel step VHF 2.5, 3.125kHz
UHF 5, 6.25kHz
Frequency stability ±1.5kHz
Operating temp. range -25°C to +55°C
Power supply voltage 13.2V DC
Current drain TX at 25W 7A         
RX Max. audio 1200mA
Stand-by 300mA
Antenna impedance 50Ω (SO-239)
Dimensions 150(W) × 40(H) × 117.5(D) mm
Weight 800g
TRANSMITTER
Output power 25W (at 13.2V DC)
Max. frequency deviation ±5.0kHz (wide) 
±4.0kHz (middle) 
±2.5kHz (narrow)
Spurious emissions 0.25μW (below 1GHz)
Adjacent channel power 70dB (wide, middle) 
60dB (narrow)
Mic. impedance 600Ω (8-pin modular)
RECEIVER
Sensitivity (at 20dB SINAD) -4dBμV typ. (emf)
Squelch sensitivity -4dBμV typ. (emf, threshold)
Adjacent channel selectivity 75dB typ. (wide, middle)  
65dB typ. (narrow)
Spurious response 75dB
Intermodulation 67dB typ.
Audio output power 4.0W typ. at 10% distortion / 4Ω load
Ext. SP connector 2-conductor 3.5(d)mm / 4Ω


Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard MIL 810C MIL 810D MIL 810E
Method Procedure Method Procedure Method Procedure
Vibration 514.2 VIII, X 514.3 I 514.4 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV

Measurements made in accordance with EIA-152C/204D, TIA-603.
All stated specifications are subject to change without notice or obligation.


OPTIONS