 |
- C3820 POWER CORD
- Connects U3800 to power source, 20-foot, two-conductor shielded cable with two-socket MS connector. Power end has stripped and tinned conductors. Fuse kit included.
|
 |
- C3821 RADIO CORD
- Connects radios to radio interface module, 21-foot, six-conductor shielded cable with six-pin MS connector. Radio end has stripped and tinned conductors.
|
 |
- C38-12, -25, -50, -50, -75, -100 JUMPER CORDS
- Connects Modules and U3800. Four-conductor shielded cable with four-pin MS connectors on each end. (Number after dash indicates length in feet.)
|
 |
- C3019 UTILITY RADIO ADAPTER
- Provides interface between any David Clark Series 3000 Noise Attenuating Headset and most mobile radios. Ideal for radio interface at the pump panel. Has radio PTT switch and listen level control. A 15-foot(extended) coil cord allows increased mobility.
|
 |
- 18352G-16 CONNECTOR KIT
- Accepts C3019 Utility Radio Adapter. Use as panel or bulkhead mount. A Protector Cap(13238P-01) is recommended. Six-conductor cable is recommended.(Order per foot - P/N 09271P-13)
|
 |
- C3023 BELT STATION
- Provides intercom and radio transmit capability. Has radio PTT switch and listen level control. May be used with U3814, U3815A, & U3816. A 15-foot(extended) coil cord allows increased mobility.
|
 |
- 40071G-04 FOOTSWITCH
- May be used with U3813, U3814, U3815A & U3816.
|
 |
- 40107G-01 RADIO INTERFACE ADAPTER
- Use if adapting to a Motorola Spectra, Syntor X9000, or Maratrac w/A7 heads. Mates with five-pin connector 09227P-81.
|
 |
- 40666G-01 HEADSET ADAPTER
- Allows 6000 and 4200 Series Headsets to be used with 3800 System Headset Stations (Exception: do not use with U3813 or U3817).
|
