 |
AR-8600 Mark2 |
|
AR-8600 Mark2 |
The AR8600 Mark2 is an amazingly versatile receiver which can be used mobile, base or trans-portable... powered from an external 12V d.c. power supply, 12V vehicle or from an optional internally fitted NiCad battery pack. Due to continuous development of our products, the AR8600 Mark2 has been enhanced in several areas. The upper frequency range has been extended to 3000MHz (3.0GHz), lower band sensitivity has been increased (now officially covering to 100kHz) with an enhancement to short wave performance by the addition of further bandpass filters and selection of alternative I.F. filters. Mini-Circuits RMS1 / RMS2 mixers have been employed with active SPM aerial switching devices (not diode-switching) abundantly employed throughout the signal path. The AR8600 Mark2 provides remarkable short wave performance, making other similar wide band competitors mediocre by comparison.
AR-8600 Mark2 colour leaflet in Acrobat PDF format
 |
|
A strong twin metal case with die cast front panel characterises the multi-purpose role. All mode receive capability is provided including Single Side Band with programmable tuning steps down to a resolution of 50Hz with the frequency established by a highly accurate Temperature Compensated Crystal Oscillator (TCXO). Many microprocessor features have been adopted from the trendsetting AR8200 Series-2 hand portable receiver, with the addition of a lamp dimmer and squelch operated lamp. RF preselection is provided through the crowded areas of VHF and UHF to ensure the highest levels of adjacent channel rejection with software spurii cancellation. In addition to a hinged telescopic whip aerial, the AR8600 Mark2 is supplied with a detachable plug in medium wave bar aerial which locates on the rear chassis of the receiver for localised medium wave monitoring. An additional BNC socket is mounted on the rear chassis so that 10.7MHz i.f. output may be extracted for use with external spectrum display and vector analyser units such as the AOR SDU5500. Centre stage is a custom multi-section back-lit LCD, numeric keypad, navigation keys, rotary tuning control and separate controls for volume and squelch control, the LCD can also display alpha-numeric text comments. The all important 8.33 kHz airband channel step is correctly implemented (eight-and-one-third, 33, 66, 00). Channel steps are provided in a menu and may be programmed. Step may be programmed by the operator in any receive mode using multiples of 50 Hz in any mode (i.e. 5 kHz, 12.5 kHz or even 1.25 kHz). Extensive step-adjust and frequency offset facilities are also provided (as per AR5000) to ensure tracking of the most obscure band plans, AFC (Automatic Frequency Control) is included for spot on tuning ensuring that nothing is missed.
Centre stage is a custom multi-section back-lit LCD, numeric keypad, navigation keys, rotary tuning control and separate controls for volume and squelch control, the LCD can also display alpha-numeric text comments. The chassis is manufactured from two metal compartments, effectively a metal chassis inside a metal cabinet… this provides excellent screening characteristics and great robustness highlighting its multi application role. The front panel is also manufactured from die-cast aluminium.
The all important 8.33 kHz airband channel step is correctly implemented (eight-and-one-third, 33, 66, 00). Channel steps are provided in a menu and may be programmed. Step may be programmed by the operator in any receive mode using multiples of 50 Hz in any mode (i.e. 5 kHz, 12.5 kHz or even 1.25 kHz). Extensive step-adjust and frequency offset facilities are also provided (as per AR5000) to ensure tracking of the most obscure band plans, AFC (Automatic Frequency Control) is included for spot on tuning ensuring that nothing is missed. A wide frequency coverage is available from 530 kHz to 2040 MHz (no gaps) with actual minimum acceptable frequency of 100 kHz.
All mode receive: WFM, NFM, SFM (Super Narrow FM), WAM, AM, NAM (Wide, standard, Narrow AM), USB, LSB & CW. A 3.0 kHz SSB filter is employed with true carrier re-insertion resulting in non-offset frequency readout for easy tuning of SSB transmissions. An attenuator and noise limiter are also featured.
A group of four front panel navigational keys provide a natural and intuitive path through the on-screen menus. Tuning is primarily accomplished via the main tuning dial, arrow keys and keypad. The back-lit LCD with contrast control provides operational data with the ability to add 12 character text comments to each memory channel, memory bank and search bank, a text search feature simplifies identification and recall of stored information.
Many text prompts aid operation making programming of search banks etc straight forward. Two frequencies may be displayed along with operating legends and high resolution signal meter and multi-function band scope. The band scope provides adjustable span width from 10 MHz to 100 kHz , you can move the marker, operate peak hold, transfer the marker frequency to VFO and save trace for later recall. Flexible dynamic memory bank layout is provided (memory banks may be varied in size between 10 and 90 channels each i.e. bank ‘A’ 80 channels / bank ‘a’ 20 channels with bank ‘B’ 40 channels / bank ‘b’ 60 channels etc). A total of 1,000 memories are provided in 20 memory banks, lockout, select scan, priority and auto store are also provided. In addition 40 search banks are provided with 50 pass channels per search bank and a further 50 for VFO search lockout. Comprehensive edit, move, swap and delete facilities are provided, it is possible to move whole memory & search banks. In addition you may write PROTECT memories, banks and search banks to prevent accidental over-writing of stored data including protection of the entire receiver! Scan & search rates provide a maximum of approximately 37 increments per second. Flash-ROM memory storage ensures that data is automatically saved without the need for a backup battery or capacitor.
Computer control is available via a standard 9-pin RS232 D-type connector on the rear chassis, just a standard RS232 cable is required for connection to a PC, the extensive RS232 command list is printed in the operating manual. A FREE software package is available as a download from the AOR web sites, this provides frequency control & management, searching, scanning, logging with support for geographic data from a GPS and audio recording to disk.
In addition, 'optional internal SLOT CARDS' (which fit into the rear chassis of the AR8600 Mark2) extend the capabilities even further, five cards may be fitted with two operational simultaneously. The slot cards are common to the AR8600, AR8200 and AR8200 Series-2.
Slot cards:
 |
 |
Miscellaneous:
 |
 |
| Internal Battery Option |
Optional Collins mechanical filters
|
Aerials:
| Frequency Range | 530 kHz to 2040 MHz*** | ||
| Receive Modes | WFM, NFM, SFM, WAM, AM, NAM, USB, LSB, CW | ||
| Sensitivity | 100 kHz ~ 1.9 MHz | AM: 2.5 µV (10dB S/N) | |
| 1.9 MHz ~ 30 MHz | AM: 2.0 µV (10dB S/N) | ||
| 30 MHz ~ 470 MHz | AM: 1.5 µV (10dB S/N) | ||
| NFM: 0.7 µV (12dB SINAD) | |||
| WFM: 1.0 µV (12dB SINAD) | |||
| 470 MHz ~ 1040 MHz | NFM: 0.6 µV (12dB SINAD) | ||
| 1040 MHz ~ 2040 MHz | NFM: 3.5µV (12dB SINAD) | ||
| 2040 MHz ~ 3000 MHz | NFM: 10 µV (12dB SINAD) | ||
| Selectivity | SSB/NAM | 3kHz (-6dB) | 9kHz (-60dB) |
| AM/SFM | 9kHz (-6dB) | 20kHz (-40dB) | |
| WAM/NFM | 12kHz (-6dB) | 25kHz (-40dB) | |
| WFM | 150kHz (-3dB) | 380kHz (-40dB) | |
| Aerial connection | 50Ω BNC | ||
| i.f. output | BNC 10.7MHz, bandwidth
+/- 2MHz. Bandscope compatibility with the SDU5500 configured as OTHER companion radio (non-active) |
||
| Audio output | 800mW (8Ω) MAX @ 10%
THD. Internal speaker, rear chassis 3.5mm socket, front panel 3.5mm socket |
||
| Power Consumption | 400mA typical usage, 70mA
on standby. 10.8 - 16V DC negative ground 9.6V from optional internal BP8600 NiCad |
||
| Dimensions | 155(W) x 57(H) x 195(D) mm excluding projections | ||
| Operating temperature | -5°C ~ 50°C | ||
| Weight | 2kg approx (MW bar aerial included) | ||
| Memory channels | 1,000 (20 banks) | ||
| Select scan channels | 50 | ||
| Priority channels | 1 | ||
| Search banks | 40 | ||
| PASS channels | 50 per search bank + 50 for VFO search | ||
| Scan/Search Rate | 37 increments per second maximum | ||